Aprilia Pegaso 650 Strada specifications
Model: Aprilia Pegaso 650 Strada
Category: tourist enduro
Engine and transmission
Displacement: 659cc (40.21 cubic inches)
Engine type: Single cylinder
Power: 50 HP (36.5 kW) @ 6250 RPM
Torque: 61 Nm @ 5250 RPM
Bore x stroke: 100 x 85 mm (3.9 x 3.3 inches)
Fuel system: Injection. Integrated electronic engine management system. Indirect multi-point electronic injection.
Fuel control: DOHC
Cooling system: Liquid
Transmission type final drive: Chain
Seat height: 780 mm (30.7 inches) If adjustable, lowest setting.
Overall length: 2160 mm (85.0 inches)
Wheelbase: 1479 mm (58.2 inches)
Chassis and dimensions
Frame type: Steel, open cradle, single spar frame
Front brakes: Single disc
Rear brakes: Single disc
Fuel capacity: 16 litres (4.23 gallons)
Reserve fuel capacity: 3.50 litres (0.92 gallons)
Aprilia Pegaso 650 Strada motorcycle - has the engine liquid cooled, with four valves on the cylinder, it is equipped most advanced, now, by electronic system of injection of fuel. The engine is developed for granting of brilliant performance data, low consumption of fuel and, of course, extremely low environmental contamination. The engine contains the traditional project of lubricant with a dry crankcase. The high engine power 50 hp 650 STRADA, allows to take pleasure completely in a trip and to receive unforgettable pleasure. This powerful, but the flexible engine has an exclusive curve of a twisting moment and explains dual personality PEGASO 650 STRADA: obedient and soft for a daily adventure and tourism, and aggressive for a sports trip.
Efficiency can be idle time. A compact steel frame - a fine basis for thoroughbred supermotard as Pegaso 650 strada. Despite its extremely easy weight, this frame gives excellent characteristics with possibility of easy maintenance operation of units.
The big work has been done on a suspender for the purpose of increase in a road gleam and comfort maximisation. PEGASO 650 STRADA it is equipped by a plug with the greatest diameter of feathers in the class (45 mm). A wheel course - 140 mm. This plug provides probably best compromise between simplicity of a trip, the control at braking and comfort. The rear absorber with preset adjustment of a spring and a course on a shaft of 130 mm is created for the maximum control over a motorcycle in sports modes of driving, and also in usual conditions.
No small detail has been missed at calculations of a braking system of the given motorcycle, therefore Aprilia has established brakes of firm Brembo, the recognised leader in manufacture of braking systems. The front brake with a huge brake plate in diameter of 320 mm with 4 piston caliper, allows to dose out accurately effort and to be completely assured of brakes, that was accessible only on motorcycles of a class supersports earlier. This powerful front brake is helped by a rear brake consisting of a disk in diameter of 240 mm with floating 2 piston caliper.
Aprilia Pegaso 650 Strada discussion group -